|
GM10 |
Submersible Drainage Pump |
pdf |
|
| |
 |
Construction |
|
Submersible drainage pump constructed with composite polymers developed
especially for this product.
These new rustproof materials are resistant to corrosion, in deformable at
maximum temperature differentials in the pump and motor and resistant to
internal and external strain.
Shaft of chrome steel AISI 430.
Three lip seals in NBR.
Minimum dimension and high levels of performance,
for use in many different
applications,
for flow rates up to 200 liters/min.
With float switch for automatic start/stop. |
|
Applications |
For clean or slightly dirty water.
For draining flooded rooms or tanks.
Extraction of water from ponds, flowing water or pits for collection of rain
water. For irrigation purposes.
For use outdoor, the power supply cable shall have a length not less than 10 m. |
|
Operating conditions |
Maximum liquid temperature for prolonged use: 30 °C (with immersed motor).
Immersion depth: 5 m max (with suitable cable length). |
|
Motor |
2-pole induction motor, 50 Hz (n = 2900 rpm).
Single-phase 230 V ± 10%, with thermal protector.
Capacitor inserted in the housing incorporated in the Control box.
Cable: with plug, length 5 m, 4 x 0,75 mm2, type H05RN-F according to EN
60335-2-41
(Paragraph 25.6) for pumps up to 5 kg.
Insulation class B.
Protection IP 68.
Triple impregnation humidity-proof dry winding. |
|
Special features on request |
Other voltages.
Frequency 60 Hz (as per 60 Hz data sheet).
Cable H07RN-F, 4x1 mm2, length 10 m, without plug.
Control box with capacitor, for pumps with cable without plug.
Without float switch.
With elbow on discharge port. |
|
Warranty |
|
One year (as per our general sale conditions). |
