|
IDROMAT |
Electronic regulator for pumps |
|
|
| |
 |
Construction |
|
Regulation device equipped with flow and pressure sensor connected to an
electronic system.
Inlet and delivery connection ports of the same diameter (G1).
Built-in check valve.
Pressure gauge 0-10 bar for IDROMAT 2. |
|
Applications |
Automatic control of pumps for water supply and increase of network pressure.
Control of starting/stopping of the pump when utilization points are
opened/closed.
For protection of the pump:
– against dry running;
– against the risk of operation without water at the inlet (caused by a lack of
water inflow in the inlet pipe under positive suction head, by a non-immersed
suction pipe, by excessive suction lift or by air entering the suction pipe);
– against operation with closed connection ports. |
|
Operating conditions |
 For pumps with delivery up to 10
m3/h.
Maximum working pressure: 10 bar.
Liquid temperature up to 60 °C.
Mains voltage: 220 V - 250 V, single-phase.
Frequency: 50 - 60 Hz.
Protection: IP 55 (IP 65 for IDROMAT 2).
Current values:
25A max at start-up;
10A during operation. |
